DIY 3D Baby Hand and Foot Print Plaster Mold Kit
DIY 3D Baby Hand and Foot Print Plaster Mold Kit
Dosage Reference:
-
0-3 months:
- One hand: Clone powder 60g + water 160ml | Model powder 80g + water 50ml
- One foot: Clone powder 80g + water 200ml | Model powder 100g + water 70ml
-
3-12 months:
- One hand: Clone powder 100g + water 250ml | Model powder 150g + water 100ml
- One foot: Clone powder 150g + water 400ml | Model powder 200g + water 130ml
-
2-4 years old:
- One hand: Clone powder 150g + water 400ml | Model powder 200g + water 130ml
- One foot: Clone powder 200g + water 500ml | Model powder 250g + water 160ml
-
5-12 years old:
- One hand: Clone powder 200g + water 500ml | Model powder 250g + water 160ml
- One foot: Clone powder 250g + water 600ml | Model powder 300g + water 200ml
-
Adult one hand:
- Clone powder 300g + water 1100ml | Model powder 600g + water 500ml
-
Adult hands:
- Clone powder 500g + water 1600ml | Model powder 1200g + water 800ml
Note: Choose a container that fits your hand or foot with some space around it without touching the sides. Use water at 10-20°C for the clone powder. Higher temperatures will accelerate solidification. The model powder can be mixed with room temperature tap water.
Instructions:
- Prepare Molding Mixture: Mix the molding powder with 3 to 3.2 times the amount of water (300-320 ml). Stir quickly until the mixture is smooth. The mixture will turn a purple/pink color. Do not add too much water.
- Submerge Hand or Foot: After 1 minute, place the baby's hand or foot into the mixture, ensuring complete submersion without breaking the surface or touching the container edges.
- Hold Still: Keep the hand or foot as still as possible while the mixture sets.
- Set the Mold: Hold for an additional 240 seconds to ensure the mold is fully set. Carefully remove the hand or foot from the mold.
- Release Air: Slightly wiggle the hand or foot to allow air to enter the mold opening for an easy release.
- Prepare Plaster Mixture: Mix 50g of plaster powder with 80-90 ml of water. Stir quickly until smooth. Avoid adding too much water for a stronger casting.
- Pour Plaster: Slowly pour the plaster mixture into the mold. Jiggle the mold gently to fill all areas and avoid air bubbles.
- Set the Plaster: Let the plaster set for 1 hour. Gently remove the mold from the casting using a knife or your hands, being careful not to break the casting.
- Clean and Dry: Wash off any surface powder with water and let the casting air dry for 24 hours.
- Paint (Optional): After 24 hours, paint the casting in any color you like.
Important: Do not add too much water to the powder mixture, as this will prevent the casting from setting properly
Share
You may also like
-
Handmade Star Baby Mobile Toy for Crib
Regular price $56.00 AUDRegular priceUnit price / per
Bracket Infant Crib Toys
Using building blocks toys can stimulate children's imagination and creativity, allowing them to try different ways to stack blocks and create different shapes and patterns. Stacking blocks requires children to perform operations such as spatial perception and shape classification, which can help children develop their brains and improve their cognitive abilities.